---
title: Zero DTCs Do Not End the Diagnosis — Read the Scope and Conditions
description: Distinguish a valid zero result from an unavailable result.
url: "https://bestnetllc.co.jp/en/docs/ai-obd-diagnostics-02-reading-results-en/"
updated: "2026-11-13"
category: Tech Blog / AI Collaboration
---

# Zero DTCs Do Not End the Diagnosis — Read the Scope and Conditions

BESTNET TECH BLOG

Zero DTCs Do Not End the Diagnosis — Read the Scope and Conditions

Distinguish a valid zero result from an unavailable result.

Author: Hideyuki Chinda / BESTNET LLC2026-10-13Series "AI-assisted OBD diagnostics" — Part 2

Updated 2026-11-13

This article records the approach used in work carried out on October 13, 2026. It does not describe the vehicle's current condition.

A diagnostic trouble code, or DTC, is a fault code returned by diagnostics. The initial standard OBD read returned zero stored and pending DTCs, while another category was unavailable. Here is how those results should be interpreted.

## Check what was queried

Standard OBD results cover the items that were queried. A zero count alone does not establish that every system in the vehicle is healthy.

## Separate zero from unavailable

A valid response with no matching records differs from a result that could not be obtained. Preserve missing results and communication failures instead of converting them to zero.

## Compare values with their acquisition conditions

A value obtained with the engine stopped is not a measurement during starting. Check AI summaries against the original records, and do not use limited observations to identify a part for replacement.

References: [OBD Solutions: OBD services](https://www.obdsol.com/knowledgebase/obd-software-development/obd-services-modes/)

AI-assisted OBD diagnostics

1. [Starting OBD Diagnostics with AI — Begin with the Record](https://bestnetllc.co.jp/en/docs/ai-obd-diagnostics-01-logging-en/)
2. **Zero DTCs Do Not End the Diagnosis — Read the Scope and Conditions**
3. [Beyond Standard OBD — Preparing Manufacturer-Specific Diagnostics](https://bestnetllc.co.jp/en/docs/ai-obd-diagnostics-03-manufacturer-protocols-en/)
